JavaScript is not enabled

Without Javascript being enabled on your browser, you will not be able to access all information provided on this website.

Need help? Please read How to Enable JavaScript on your Browser.

My Account

Flat Head Sleeve Anchor - 3/8" Philips - Zinc Plated / SLF

Product #: UCASLF38234
Anchor Size: 3/8"; Length: 2-3/4"
/
Available Online: 324
Availability by Branch:
This combination does not exist. Please select another one.

Ideal Uses
  • Concrete
  • For a Light Duty Anchor
  • For a Medium Duty Anchor
Resources
Description
The UCAN Sleeve Anchor is made to the highest quality standards. UCAN Fastening Products are strictly quality-controlled to assure consistent performance.

For over 50 years, UCAN has specialized in producing and distributing concrete anchors and other fastening products. UCAN strives to provide the most practical and cost effective solutions to meet the needs of engineers, contractors, and tradesmen.

These flat-head Phillips sleeve anchors are ideal for when you need the fastener head to be flush with the fixture surface.

For concrete, hollow block and brick applications, this sleeve anchor is an ideal light to medium duty anchor.

These anchors are mechanical expansion anchors, which are assembled with an expansion sleeve, spacer, nut, and washer.

Average Ultimate Load

with 3/8" Anchor Size & 1-1/2" Embedment
Normal weight stone aggregate concrete
PSITensionShear
2000 psi1625 lbf3064 lbf
4000 psi3080 lbf3064 lbf

Allowable Loads

with 3/8" Anchor Size & 1-1/2" Embedment
Normal weight stone aggregate concrete
PSITensionShear
2000 psi406 lbf766 lbf
4000 psi770 lbf766 lbf


Please Note: Not recommended for uncured concrete (less than 7 days old), lightweight concrete, masonry block or brick.
Specifications
Clearance Hole Dia.: 7/16 inch
Drive Type:Phillips
Effective Embedment : 1-1/2 inch
Head Type:Flat
Internal Thread Dia.: 5/16 inch
Max Installation Torque: 12 ft x lbf
Min. Anchor Spacing: 1-7/8 inch
Min. Base Material Thickness: 3 inch
Min. Edge Distance: 1 inch
Plating:Zinc
Required Anchor Spacing for 100% performance: 3-3/4 inch
Required edge distance for 100% performance: 1-3/4 inch
Type:Mechanical Expansion
Reviews

Write a review

Flat Head Sleeve Anchor - 3/8" Philips - Zinc Plated / SLF

Flat Head Sleeve Anchor - 3/8" Philips - Zinc Plated / SLF

UCAN - Mechanical expansion anchor - Fastener head will be flush to fixture surface - Light to medium duty anchor