All Fasteners
All steel construction - Meant to be used with aluminum rivets
$201.52 /EA
ADD TO CART
All steel construction - Meant to be used with aluminum rivets
$201.52 /EA
ADD TO CART
Jaw is specially built to reduce stress on beam flanges - Threaded handle - Special locking mechanism - Built-in suspension bar
$190.99 /EA
Please Call for Special Orders
Jaw is specially built to reduce stress on beam flanges - Threaded handle - Special locking mechanism - Built-in suspension bar
$190.99 /EA
Please Call for Special Orders
Supplied with 3/32" mounting plate & nuts - Clear zinc plated - UNC threading (coarse)
# Options: 3
$1.72 +
Supplied with 3/32" mounting plate & nuts - Clear zinc plated - UNC threading (coarse)
$1.72 +
Supplied with 3/32" mounting plate & nuts - Clear zinc plated - UNC threading (coarse)
# Options: 8
$2.44 +
Supplied with 3/32" mounting plate & nuts - Clear zinc plated - UNC threading (coarse)
$2.44 +
Pipe
Info
PROD #
Price
Supplied with 3/32" mounting plate & nuts - Clear zinc plated - UNC threading (coarse)
# Options: 3
$5.07 +
Supplied with 3/32" mounting plate & nuts - Clear zinc plated - UNC threading (coarse)
$5.07 +
Supplied with 3/32" mounting plate & nuts - Clear zinc plated - UNC threading (coarse)
# Options: 6
$4.35 +
Supplied with 3/32" mounting plate & nuts - Clear zinc plated - UNC threading (coarse)
$4.35 +
Inserts can be installed onto wooden forms used to support newly poured concrete floor slabs, roof slabs, or walls - Color coded by size
# Options: 1
$278.40
Inserts can be installed onto wooden forms used to support newly poured concrete floor slabs, roof slabs, or walls - Color coded by size
$278.40
Thread Diameter
Info
PROD #
Price
Consistent performance in high and low strength concrete - Nominal drill bit size is the same as the anchor diameter - Anchor can be installed through standard fixture holes
# Options: 2
$147.38 +
Consistent performance in high and low strength concrete - Nominal drill bit size is the same as the anchor diameter - Anchor can be installed through standard fixture holes
$147.38 +
DIA.
Info
PROD #
Price
Corrosion Resistant - Light-Duty - Tamperproof - Carbon Steel Nail - For use in concrete, block, brick, or stone
# Options: 1
$20.73
Corrosion Resistant - Light-Duty - Tamperproof - Carbon Steel Nail - For use in concrete, block, brick, or stone
$20.73
Length
PROD #
Price
Replaces traditional stick pin method - Integrated thermal cap - 99.4% Thermal Efficiency - Will not collapse the hollow block like powder-actuated clips
# Options: 4
$1027.68 +
Replaces traditional stick pin method - Integrated thermal cap - 99.4% Thermal Efficiency - Will not collapse the hollow block like powder-actuated clips
$1027.68 +
Length
Info
PROD #
Price
12 Gauge - 1-5/8" x 1-5/8" x 10' - LOW CARBON STEEL - COLD FORMED - Pre-Galvanized Finish - Steel Framing Strut Channel - Built with Inturned Lips Along its Length
# Options: 1
$3.95
12 Gauge - 1-5/8" x 1-5/8" x 10' - LOW CARBON STEEL - COLD FORMED - Pre-Galvanized Finish - Steel Framing Strut Channel - Built with Inturned Lips Along its Length
$3.95
Hole Pattern
Height
Width
Info
Qty Info
PROD #
Price
9/16” x 1-1/8” slots on 2" centers
1-5/8"
1-5/8"
Sold in 10' Sections
Sold per 10
Min Buy of 10
$3.95 /FT
ADD TO CART
For use in concrete and masonry - All-steel - Pre-assembled - Single unit - Sleeve design keeps anchor centered in hole
$93.70 /EA
Call for Availability
For use in concrete and masonry - All-steel - Pre-assembled - Single unit - Sleeve design keeps anchor centered in hole
$93.70 /EA
Call for Availability
Vertical Mount - For Wood - 3/8" Rod Size - 1/4" - Uses nut driver #8113910 (Black) - Self-drilling and self-tapping into wood
# Options: 2
$1554.57 +
Vertical Mount - For Wood - 3/8" Rod Size - 1/4" - Uses nut driver #8113910 (Black) - Self-drilling and self-tapping into wood
$1554.57 +
Length
PROD #
Price
Trolley Assembly - 4-Bearing - Light Duty - Series: B478H - 3" Length - 100 lb Load - Strip Steel - Zinc Plated
$225.30 /EA
Call for Availability
Trolley Assembly - 4-Bearing - Light Duty - Series: B478H - 3" Length - 100 lb Load - Strip Steel - Zinc Plated
$225.30 /EA
Call for Availability
Clipped Head - Smooth Shank - Brite Finish
# Options: 3
$72.58 +
Clipped Head - Smooth Shank - Brite Finish
$72.58 +
Length
Info
PROD #
Price
