Rustoleum Marking Paint - 10.5 oz - Pouch / 275 Series *SPRAY SMART
Propellant-Free - Hydrocarbon Resin - Any Direction - Any Weather Condition - 500-600 Linear Feet Coverage - For marking utilities without the use of propellants

Marking Paint - 10.5 oz - Pouch / 275 Series *SPRAY SMART


Propellant-Free - Hydrocarbon Resin - Any Direction - Any Weather Condition - 500-600 Linear Feet Coverage - For marking utilities without the use of propellants

Product #: RUS275088
Options: Color: Fluorescent Green
Info:

Pls.Call

0

/EA

Available Online: 0
Pre Order Item
Estimated Availability Date:
Availability in Store:

Please Call for Special Orders : 403-287-5340


QTY:

ADD TO CART
BUY DIRECT

No customer reviews for the moment.

Product Description

The Rustoleum Spray Smart Marking Paint is built to provide a propellant free marking system with less waste and hazards.


Build

This paint is applied using the Spray Smart™ Dispenser and operates on a built-in lithium-ion rechargeable battery.

The device uses compression to spray the paint rather than a propellant.

Get up to 500 - 600 linear feet of coverage, per pouch, when making 1” wide marks.

Covers with just one pass on asphalt, concrete, rocks, leaves, pavement, soil, grass, sand, snow, and more.


Sprays on any substrate, in any direction and in any weather condition!


Safety

These marker paint pouches can be tossed in regular trash rather than needing to be collected to be disposed of through hazmat procedures.

Pouches are safer to store and transport than aerosol paint cans.

Keep product away from ignition sources.

How to Use

  • Massage and shake pouch for 30-60 seconds before every use
  • Remove valve cap
  • Hold top by inner ring
  • Insert valve into inner ring and then into pressure vessel
  • Twist cap down turning threaded collar clockwise until tight
  • Hold device 4 to 6 inches above surface to be marked
  • Press tip sideways to spray or use marking wand
  • Keep device moving to avoid any build up
  • If clogging occurs remove pouch and massage or shake for 30 seconds
  • Keep pouches stored upright and preferably in a cool location
  • When finished, shut off the device and depressurize by pressing the button on the side of the top assemble
  • Partially used paint pouches can be saved for future use
  • Replace the valve cap

Technical Data

Resin TypeHydrocarbon Resin
Pigment Type Varies with Color
SolventsMineral Spirits, Aromatic 100
Volatile Organic Compounds650 g/l (5.42 lbs / gal)
Fill 10.5 Fluid Ounces
Practical Coverage Approximately 500-600 Linear Feet at 1” Wide
Dry Times @ 21-27°C and 50% Relative Humidity 5 - 10 Minutes
Usable Temperature Range-23°C to 46°C
Max VOC< 610
Shelf Life3 Years

Certifications, Standards, and Regulations

  • DuPont Packaging Award
Product Specifications
Vendor Part #:275085
Container Size:10.5 fl oz
Max Operating Temperature:-23°C to 46°C
Coverage:500 - 600 Linear Feet
Product Document
  • for‎ Safety & Hazard Marking