3M Adhesive - 2 Part Epoxy - Grey - Can / 2216 Series *SCOTCH-WELD
Two Parts - 90 Min Work Time @ 23°C - 2:3 Ratio - 12 Hr Handling Strength - Flexible - High Peel & Shear Strength - For bonding metals, woods, plastics, rubbers, and masonry 

Adhesive - 2 Part Epoxy - Grey - Can / 2216 Series *SCOTCH-WELD


Two Parts - 90 Min Work Time @ 23°C - 2:3 Ratio - 12 Hr Handling Strength - Flexible - High Peel & Shear Strength - For bonding metals, woods, plastics, rubbers, and masonry 

Product #: 3MA2216B/AGAL
This product cannot be shipped. Product may be "Dangerous Goods" or become damaged if frozen during shipping. You may contact us at 403-287-5340 for further information.

Options: CONTR Size: Gallon
Info: 2 Parts

$1,252.30 /EA
Login for contractor price
Regular: $1,252.30 /

3MA2216B/AGAL Gallon 2 Parts , SoldOut
$1252.30 /EA
CONTR Size
Info
PROD #
Price
Gallon
2 Parts
3MA2216B/AGAL
$1252.30 /EA

1252.3

/EA

This combination does not exist. Please select another one.
Available Online: 0
Pre Order Item
Estimated Availability Date:
Availability in Store:

Please Call for Special Orders : 403-287-5340


QTY:

ADD TO CART
BUY DIRECT
3MA2216B/AGAL Gallon 2 Parts
$1252.30 /EA
Please Call for Special Orders : 403-287-5340
CONTR Size
Info
PROD #
Price
Gallon
2 Parts
3MA2216B/AGAL
$1252.30 /EA

No customer reviews for the moment.

Product Description

The 3M Scotch-Weld 2 Part Epoxy #2216 is built to bond metals, woods, plastics, rubbers and masonry products.


Build

This epoxy is excellent for cryogenics and where flexibility from extreme shock and vibrations can cause bond failure.

The base and accelerator are two different colors so they are easy to differentiate and determine if mixing has been thorough enough.

Mix at a 2:3 ratio by volume or a 5:7 ratio by weight.

This product has excellent holding power after long periods of time and under different environmental conditions.

Cures in the air for 7 days @ 25°C and requires pressure during the curing process.


Get up to 320 sq ft coverage per gallon at a 0.005" thick spread!


Safety

Wear proper PPE such as gloves, coveralls, face protection and hair protection.

Capacities

Bondable Materials
MetalsWoodsPlasticsRubbersMasonry

How to Use

  • For the highest strength bond, the surfaces should be extremely clean
  • Mix thoroughly by weight or volume in the proportions stated
  • Mix for another 15 seconds after there is a consistent color throughout the epoxy
  • Use a spatula, trowel or flow equipment to apply this epoxy
  • Apply an even amount to both surfaces for the best bond possible
  • There is a 90-minute open time to connect materials and align them before the curing process starts @ 23°C
  • Cure between 16°C and 93°C for best results. At 25°C it will take 7 days to cure fully whereas at 93°C it only takes 30 minutes.

Clean-Up and Storage

Any uncured epoxy can be cleaned with any ketone type solvent.

Store both components at 16 - 27°C for a maximum storage life of 2 years from being shipped from 3M.

Certifications, Standards, and Regulations

  • DOD-A-82720
  • ASTM D 1002
  • ISO 9001:2000

  • Acrylic and Epoxy Adhesives: Two part adhesives that provide excellent bonding strength and durability. Acrylic cures fast, can be applied on oily or unprepared surfaces and bonds to nearly all types of plastics, unlike epoxies.
Product Specifications
Vendor Part #:2216B/AGAL
Product Document
  • Bonding Metals, Woods, Plastics, Rubbers and Masonry