Lock Washer - Helical Spring / A2 Stainless Steel
DIN 127B - METRIC - Resists Corrosion, Rust, and Stains - To prevent hex head cap screws from loosening
DIN 127B - METRIC - Resists Corrosion, Rust, and Stains - To prevent hex head cap screws from loosening
Product #: LWMS6MMA2
Product is missing measurements and cannot be shipped. Please call 403-287-5340 so we can fix this issue and enable shipping.
Options: For Bolt Dia.: M6
Info: 6.1 mm I.D. || 11.8 mm O.D.
$17.76 /EA
Login for contractor price
Regular: $17.76 /
LWMS6MMA2 M6 6.1 mm I.D. || 11.8 mm O.D. , InStock
$17.76 /100PC
LWMS10MMA2 M10 10.2 mm I.D. || 18.1 mm O.D. , InStock
$47.68 /100PC
LWMS12MMA2 M12 12.2 mm I.D. || 21.1 mm O.D. , InStock
$32.16 /100PC
LWMS16MMA2 M16 16.2 mm I.D. || 27.4 mm O.D. , InStock
$56.06 /100PC
For Bolt Dia.
Info
PROD #
Price
M6
6.1 mm I.D. || 11.8 mm O.D.
LWMS6MMA2
$17.76 /100PC
M10
10.2 mm I.D. || 18.1 mm O.D.
LWMS10MMA2
$47.68 /100PC
M12
12.2 mm I.D. || 21.1 mm O.D.
LWMS12MMA2
$32.16 /100PC
M16
16.2 mm I.D. || 27.4 mm O.D.
LWMS16MMA2
$56.06 /100PC
Available Online: 100
Pre Order Item
Estimated Availability Date:
Estimated Availability Date:
Availability in Store:
We're low on this Washer. Please Call for Availability : 403-287-5340
QTY:
BUY DIRECT
LWMS6MMA2 M6 6.1 mm I.D. || 11.8 mm O.D.
$17.76 /100PC
LWMS10MMA2 M10 10.2 mm I.D. || 18.1 mm O.D.
$47.68 /100PC
LWMS12MMA2 M12 12.2 mm I.D. || 21.1 mm O.D.
$32.16 /100PC
LWMS16MMA2 M16 16.2 mm I.D. || 27.4 mm O.D.
$56.06 /100PC
For Bolt Dia.
Info
PROD #
Price
M6
6.1 mm I.D. || 11.8 mm O.D.
LWMS6MMA2
$17.76 /100PC
M10
10.2 mm I.D. || 18.1 mm O.D.
LWMS10MMA2
$47.68 /100PC
M12
12.2 mm I.D. || 21.1 mm O.D.
LWMS12MMA2
$32.16 /100PC
M16
16.2 mm I.D. || 27.4 mm O.D.
LWMS16MMA2
$56.06 /100PC
Product Description
Helical Spring Split Stainless Steel Lock Washer
√ CORROSION RESISTANT STEEL
DIN 127B
A2 Stainless Steel
*Metric
STANDARD SIZES
Built for use with hex head cap screws DIN 931 & DIN 933 to aid in preventing them from loosening.
Regular Split Lock Washer Thicknesses
For Bolt Diameters | Thickness |
M2 | 0.5 mm |
M6 | 1.6 mm |
M10 | 2.2 mm |
M12 | 2.5 mm |
M14 | 3 mm |
M16 | 3.5 mm |
- Platings, Coatings & Finishes: There are a variety of coatings and platings that can be used in the prevention or delaying corrosion in fasteners. Platings and coatings can also enchance or change the physical look of nuts, bolts and washers for projects that require specific aesthetic care.
- Lock Washer: Lock Washers are built to prevent a bolt or nut from loosening after it has been tightened. When a bolt or nut is used with this kind of washer between the surface being bolted to, the washer uses either compression with a spring force or interlock and bite to lock the bolt or nut in place. This helps to prevent vibration from loosening the bolt or nut and causing the joint to lose strength.
- Split Lock Washers: These lock washers are made with a split where the ends are slightly uneven from each other. When compressed, the split ends bite into either the head of a bolt or the nut depending on how it is used, this helps to prevent the bolt or nut from loosening.
Product Specifications
Vendor Part #: | S2MMA2 |
Material: | A2 Stainless Steel |
Washer Type: | DIN 127B |
- √Preventing Nuts and Bolts from Loosening
- Product | Explore Nut, Bolt & Washer Specifications Browse Fastener Standards, Materials Specification and Thread Designations to find the product you need
https://www.calfast.com/6993-Explore-Nut-Bolt-Washer... - Product | Specials & Promotions Current Specials & Promotions from Major Power Tool Brands, Fasteners, Hand Tools & More!
https://www.calfast.com/specials-promotions - Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.calfast.com/cs_wiki/wiki/47-ingress-prot...