ERICO Conduit to Beam Clamp - 1/4" - Steel / BRIGHT ZINC
Clamp Riveted to Conduit Clip - Threaded Hole on Back - For eliminating offset bending conduit - Ideal for electrical, mechanical, and HVAC applications
Conduit to Beam Clamp - 1/4" - Steel / BRIGHT ZINC
Clamp Riveted to Conduit Clip - Threaded Hole on Back - For eliminating offset bending conduit - Ideal for electrical, mechanical, and HVAC applications 
Product #: CADBC200CD0B
Product is missing measurements and cannot be shipped. Please call 403-287-5340 so we can fix this issue and enable shipping.
Options: Outside DIA.: 0.67" to 0.84"
Info:
Discontinued
Available Online: 0
Pre Order Item
Estimated Availability Date:
Estimated Availability Date:
Availability in Store:
Discontinued : 403-287-5340
QTY: 
BUY DIRECT
Product Description
The Caddy Erico Beam Clamps are built to eliminate offset bending conduit.
Build
Supports 1/4” threaded rod, 1/4” threaded brindle rings, and boxes.
Easy installation to beam flanges up to 1/2”.
Riveted to conduit clips 1/2” to 2”.
Slotted hex combo head!
Capacities
| Part # | Rigid (in) | EMT (in) | Pack Qty |
| BC200CD0B | 1/2 | 1/2 | 50 |
| BC200CD1B | 3/4 | 3/4 | 50 |
| BC200CD2.5B | N/A | 1-1/4 | 50 |
| BC200CD2B | 1 | 1 | 50 |
| BC200CD3B | 1-1/4 | 1-1/2 | 50 |
| BC200CD4B | 1-1/2 | N/A | 25 |
| BC200CD5B | 2 | 2 | 25 |
Certifications, Standards, and Regulations
- cULus
Product Specifications
| Vendor Part #: | BC200CD0B |
| Certification(s) / Agency Approval(s) / Compliance: | cULus |
| Finish: | Electrogalvanized |
| Flange Thickness: | [1/2 inch] Max |
| Material: | Steel |
| Rod Size: | [1/4 inch] |
| Static Load: | [100 lbs.] |
| Torque: | [3 ft. lbs.] |
- √Eliminate Offset Bending Conduit
- Product | Electrical Products See our selection of electrical products that help keep energy flowing!
https://www.calfast.com/3171-Electrical-Products - Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.calfast.com/cs_wiki/wiki/47-ingress-prot...
