DeWALT Anchors & Fasteners Wedge Anchor - 3/8" - Carbon Steel / 741 Series *POWER-STUD+ SD1
UNC Threaded Stud - Torque-Controlled - Zinc Plated Carbon Steel Body w/ Expansion Clip, Nut & Washer - For use in uncracked concrete applications
Wedge Anchor - 3/8" - Carbon Steel / 741 Series *POWER-STUD+ SD1
UNC Threaded Stud - Torque-Controlled - Zinc Plated Carbon Steel Body w/ Expansion Clip, Nut & Washer - For use in uncracked concrete applications 
Product #: DWP7414SD1
Product is missing measurements and cannot be shipped. Please call 403-287-5340 so we can fix this issue and enable shipping.
Options: For Bolt Dia.: 3/8"; Length: 3-1/2"
Info: Head Marking: E+
$72.74 /100PC
DWP7414SD1 3/8", 3-1/2" Head Marking: E+ , SoldOut
$72.74 /100PC
For Bolt Dia.
Length
Info
PROD #
Price
3/8"
3-1/2"
Head Marking: E+
DWP7414SD1$72.74 /100PC
Additional freight costs may apply
Please Call for Special Orders : 403-287-5340
QTY: 
BUY DIRECT
DWP7414SD1 3/8", 3-1/2" Head Marking: E+
$72.74 /100PC
Please Call for Special Orders : 403-287-5340
For Bolt Dia.
Length
Info
PROD #
Price
3/8"
3-1/2"
Head Marking: E+
DWP7414SD1$72.74 /100PC
DeWALT Anchors & Fasteners
No customer reviews for the moment.
Product Description
The Powers Power-Stud+ SD1 Wedge Expansion Anchor is built to provide consistent performance in uncracked concrete.
Build
Consistent performance in high and low strength concrete.
The nominal drill bit size is the same as the anchor diameter.
These anchors can be set through standard fixture holes and the anchor design allows for follow-up expansion after setting under tensile loading.
Zinc plated for corrosion resistance!
Certifications, Standards, and Regulations
- ICC-ES, ESR-2818 for concrete Code cpmpliant with the 2015 IBC + IRC, 2012 IBC + IRC, 2009 IBC + IRC and the 2006 IBC +IRC
- ICC-ES, ESR-2966 for masonry Code compliant with the 2012 IBC + IRC, 2009 IBC + IRC, 2006 IBC + IRC
- ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318
- ICC-ES AC01 for use in masonry
- UL listed – File No. EX1289
- Independently tested and accredited for use in cracked and uncracked concrete including seismic and wind loading
Product Specifications
| Vendor Part #: | 7414sd1 |
| Diameter: | [3/8 inch] |
| Material: | Carbon Steel |
| Plating: | Zinc |
- √Use in Cracked and Uncracked Concrete
- √In Normal-Weight Concrete
- √In Sand-Lightweight Concrete
- √In Concrete Over Steel Decking
- √In Grouted Concrete Masonry
- Product | Drill Bits, Kits & Accessories Cutting Tools built to remove material and create holes
https://www.calfast.com/353-Drill-Bits-Kits-Accessories - Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.calfast.com/cs_wiki/wiki/47-ingress-prot...
A few things you may need
