All Anchors
Works in Dry & Water-Saturated Concrete - Low Odor - Freeze/Thaw Performance - For use with threaded rod & reinforcing bar hardware elements in concrete & masonry
# Options: 2
$29.96 +
$29.96 /EA
ADD TO CART
$56.22 /EA
Call for Availability
Works in Dry & Water-Saturated Concrete - Low Odor - Freeze/Thaw Performance - For use with threaded rod & reinforcing bar hardware elements in concrete & masonry
$29.96 +
CONTR Size
Info
PROD #
Price
Zinc Plated - Built with a long thread & has letter coded studs - IAPM ES® Listed ER-0373 - AC 193 (from Ø3/8" to 3/4) Tested - Length: 9" - Diameter: 1" - Head Marking: P
$1942.25 /100PC
ADD TO CART
Zinc Plated - Built with a long thread & has letter coded studs - IAPM ES® Listed ER-0373 - AC 193 (from Ø3/8" to 3/4) Tested - Length: 9" - Diameter: 1" - Head Marking: P
$1942.25 /100PC
ADD TO CART
150 pkg - *FLAT COUNTERSUNK HEAD / DIAMOND POINT - FOR FASTENING LUMBER TO CONCRETE OR MASONRY *ASTM F1667, A153 Class D, ASTM C514 - ISO 9001:2008
# Options: 2
$6.63
$6.63 /BOX
ADD TO CART
$6.63 /BOX
Call for Availability
150 pkg - *FLAT COUNTERSUNK HEAD / DIAMOND POINT - FOR FASTENING LUMBER TO CONCRETE OR MASONRY *ASTM F1667, A153 Class D, ASTM C514 - ISO 9001:2008
$6.63
Length
Info
PROD #
Price
Built for eye, lap and stop sleeve splicing *PLEASE NOTE: Aluminum Sleeves & Stops are not recommended for critical overhead lifting applications
# Options: 8
$0.41 +
#MCR7020, 1/16"
$0.41 /EA
ADD TO CART
#MCR7021, 3/32"
$0.41 /EA
ADD TO CART
#MCR7022, 1/8"
$0.90 /EA
ADD TO CART
#MCR7023, 5/32"
$0.43 /EA
ADD TO CART
#MCR7024, 3/16"
$0.87 /EA
ADD TO CART
#MCR7025, 1/4"
$1.19 /EA
ADD TO CART
#MCR7026, 5/16"
$1.84 /EA
ADD TO CART
#MCR7027, 3/8"
$2.42 /EA
Call for Availability
Built for eye, lap and stop sleeve splicing *PLEASE NOTE: Aluminum Sleeves & Stops are not recommended for critical overhead lifting applications
SKU: MCR7020
Available Online: 5826
$0.41 +
For Cable Diameter
PROD #
Price
Screw type expansion anchor - Ideally used for base materials of questionable integrity - Includes die cast sleeves
# Options: 4
$52.40 +
$158.57 /100PC
Call for Availability
$52.40 /100PC
ADD TO CART
$102.25 /100PC
ADD TO CART
$56.61 /100PC
ADD TO CART
Screw type expansion anchor - Ideally used for base materials of questionable integrity - Includes die cast sleeves
$52.40 +
Light Duty - Corrosion Resistant - Non-Conductive - Self-Drilling - Use in 3/8", 1/2" and 5/8" Thick Drywall - Uses a #2 Phillips Screwdriver - For vertical fastening applications
# Options: 2
$34.31 +
Light Duty - Corrosion Resistant - Non-Conductive - Self-Drilling - Use in 3/8", 1/2" and 5/8" Thick Drywall - Uses a #2 Phillips Screwdriver - For vertical fastening applications
$34.31 +
ONLY FOR MINI UNDERCUT ANCHORS - Drop-In Anchor Setting Tool - For fast installation of DeWalt PFM2111820 3/8" x 3/4" threaded undercut anchors
$12.12 /EA
ADD TO CART
ONLY FOR MINI UNDERCUT ANCHORS - Drop-In Anchor Setting Tool - For fast installation of DeWalt PFM2111820 3/8" x 3/4" threaded undercut anchors
$12.12 /EA
ADD TO CART
Zinc Plated - Tie Wire Head - Carbon Steel Body - For consistent performance in uncracked concrete
# Options: 1
$31.55
#DWP7409SD1, 2"
$31.55 /100PC
ADD TO CART
Zinc Plated - Tie Wire Head - Carbon Steel Body - For consistent performance in uncracked concrete
$31.55
Length
PROD #
Price
Fully Threaded - Torque-Controlled - Zinc Plated Carbon Steel - Includes Nut and Washer - For use consistent performance in cracked and uncracked concrete
# Options: 3
$240.06 +
$240.06 /100PC
ADD TO CART
$297.54 /100PC
Please Call for Special Orders
$361.45 /100PC
ADD TO CART
Fully Threaded - Torque-Controlled - Zinc Plated Carbon Steel - Includes Nut and Washer - For use consistent performance in cracked and uncracked concrete
$240.06 +
DIA.
Length
Info
PROD #
Price
Inserts can be installed in form pours only 3.5" thick - Hex head does not rotate when set - Color coded by size
# Options: 4
$186.60 +
$225.92 /100PC
Call for Availability
$343.95 /100PC
ADD TO CART
$282.35 /100PC
ADD TO CART
$186.60 /100PC
Call for Availability
Inserts can be installed in form pours only 3.5" thick - Hex head does not rotate when set - Color coded by size
$186.60 +
Thread Diameter
Info
PROD #
Price
Corrosion Resistant - Light-Duty - Tamperproof - Carbon Steel Nail - For use in concrete, block, brick, or stone
# Options: 5
$26.39 +
Corrosion Resistant - Light-Duty - Tamperproof - Carbon Steel Nail - For use in concrete, block, brick, or stone
$26.39 +
NAIL - Quick and low-cost fastening method - Spiral shank and a reinforced head - Hot-dip galvanized & heat treated
# Options: 5
$117.64 +
$117.64 /1000PC
ADD TO CART
$161.47 /1000PC
ADD TO CART
$179.14 /1000PC
Call for Availability
$248.56 /BOX
ADD TO CART
$296.96 /1000PC
Call for Availability
NAIL - Quick and low-cost fastening method - Spiral shank and a reinforced head - Hot-dip galvanized & heat treated
$117.64 +
Anchor L.
Info
PROD #
Price
NAIL - Quick and low-cost fastening method - Spiral shank and a reinforced head - Hot-dip galvanized & heat treated
# Options: 8
$17.11 +
$17.11 /100PC
ADD TO CART
$19.18 /100PC
ADD TO CART
$23.33 /100PC
ADD TO CART
$29.06 /100PC
ADD TO CART
$32.60 /100PC
ADD TO CART
$39.04 /100PC
ADD TO CART
$47.39 /100PC
ADD TO CART
$49.99 /100PC
Please Call for Special Orders
NAIL - Quick and low-cost fastening method - Spiral shank and a reinforced head - Hot-dip galvanized & heat treated
$17.11 +
Anchor L.
Info
PROD #
Price
UNC Threaded Stud - Torque-Controlled - Zinc Plated Carbon Steel Body w/ Expansion Clip, Nut & Washer - For use in uncracked concrete applications
# Options: 1
$70.25
$70.25 /100PC
Please Call for Special Orders
UNC Threaded Stud - Torque-Controlled - Zinc Plated Carbon Steel Body w/ Expansion Clip, Nut & Washer - For use in uncracked concrete applications
$70.25
For Bolt Dia.
Length
Info
PROD #
Price
Fully Threaded - Torque-Controlled - Zinc Plated Carbon Steel - Includes Nut and Washer - For use consistent performance in cracked and uncracked concrete
# Options: 3
$290.38 +
#DWP7441SD1, 4-3/4"
$290.38 /100PC
Please Call for Special Orders
#DWP7442SD1, 5-1/2"
$328.42 /100PC
Please Call for Special Orders
#DWP7448SD1, 8-1/2"
$486.90 /100PC
Please Call for Special Orders
Fully Threaded - Torque-Controlled - Zinc Plated Carbon Steel - Includes Nut and Washer - For use consistent performance in cracked and uncracked concrete
$290.38 +
Length
PROD #
Price
