Search Results

Washers made of rubber or neoprene and sometimes metal-backed. Built to prevent water from migrating into and through the fastener hole.

Adhesives with either an acrylic or epoxy base that are high strength. Excellent for industrial and structural applications.

Portable compressors that can be easily carried by hand by their built-in handle.

View all Hex Head Bolts. This includes cap, flange, and more!

Fasteners built to help secure other fasteners firmly into position in a variety of materials.

Anchors built for fastening into asphalt surfaces.

Anchors built to attach objects or structures to concrete.

Anchors built for installing straight cut rebar and threaded rod into concrete.

Anchors built for light to heavy-duty anchoring in solid concrete base material. These female type anchors require setting tools for expanding the anchor.

Anchors built from metal used in light wood-frame construction for joining studs, joists, rafters and more.

Anchors built specifically for holding heavy loads without breaking or coming loose.

Anchors built for fastening to gypsum board, paneling, drywall plasterboard, and other hollow materials.

Anchors built for securing insulation to a variety of materials.

Anchors built to be used along with standard lag screws to anchor into concrete, brick and block.

Anchors built to be driven into pre-drilled holes without the used of any special tool.

Anchors built for light duty fastening into concrete, brick or block with a tamper-resistant finish.

Anchors built to be the fastest way to hang plumbing pipe, light fixtures, sheet metal duct, display fixtures and more.

Anchors built from threaded rod with a nut and washer pre-installed for quick installation.

Anchors built for fast and simple installation into drywall.

Anchors built to fasten to concrete, brick or block. Bolts used with these anchors can be removed and replaced without affecting the anchor.

Anchors built for light to medium-duty anchoring to concrete, brick or block base material.

Anchors built for use in hollow concrete blocks or any other hollow base material.

Anchors built for being inserted into drywall to secure fasteners used for hanging objects.

Anchors built for light to heavy-duty anchoring into solid concrete.

Accessories built for aiding in the installation of anchors.

Wearable Gear with shoulder straps that allows it to be carried on your back.

Power Tool Accessories built to hold and extend a variety of bits.

Bolts built from low or medium carbon steel. Primarily used with wood.

Bolts built from medium carbon steel and are quenched and tempered. Primarily used with wood.

Bolts built from a steel alloy with 17-19% Chromium and 8-13% Nickel. The finish is self-protecting and is excellent in corrosion resistance.

Bolts with threads on both ends. One end is a lag bolt thread, the other is a machine thread. Typically used in a pre-drilled hole in wood structures.

Bolts built from a steel alloy with 17-19% Chromium and 8-13% Nickel. The finish is self-protecting and is excellent in corrosion resistance.

Bolts built with a minimum tensile strength of up to 120,000 psi - For critical applications requiring greater fastener strength.

Bolts built with a minimum tensile strength of up to 150,000 psi - For extreme strength requirements.

Bolts with a built-in washer that provides greater distribution of pressure and grip resulting in no need for a separate washer.

Bolts built from medium carbon steel with its dimensions in millimeters.

Bolts with a lag screw thread and a heavy coating of zinc. This provides excellent corrosion resistance.

Collated Fateners built with small "T" shaped heads, consistant thickness throughout and a tapering width. Pins and brad (or finishing) nails are built for finishing...

Button Head Socket Cap screws are finishing screws built with a wider bearing surface usually used for cosmetic applications.

Fasteners built to hang cable and conduit.

Cable ties, tie-wraps and hooks are fasteners built for holding together electric cables and wires.

Collated fasteners built in a row and held together with a wire and then wrapped into a coil for use with a coiled nail gun.

BUILT FOR YOU - Carpentry - Coallated Fasteners - Paper Strip Nails

BUILT FOR YOU - Construction - Coallated Fasteners - Paper Strip Nails

Tool kits containing a variety of different tools to complete a project.

Concrete Screws are built for use in concrete or masonry applications usually include a corrosion coating and are commonly blue in color.

View all 12 Volt Cordless Caulking Guns.

All Combo Kits that include 18 Volt Cordless Power Tools.

All 18 Volt Drills & Drivers. This includes Joist Drills, Hammer Drills, Impact Drivers, Drill/Drivers and more.

All 18 Volt Hammers & Hammer Drills. This includes all brands and variations such as Jack Hammers, Rotary Hammer Drills and more.

Cordless wearable accessories built to keep you warm with multiple heat settings.

Cordless Power Tools built to lift or lower a load by means of a drum or lift-wheel around which rope or chain wraps.

All 12 Volt Impact Tools. This includes all brands and variations such as Impact Drivers and Impact Wrenches.

All 18 Volt Impact Tools.

All 18 Volt Screwguns.

All 20 Volt Screwguns.

All 20 Volt Staplers & Nailers. This includes all brands and variations such as Staplers, Nail Guns, Pinners, Brad Nailers and more.

Fasteners built with a female thread that is used to connect two male threaded components together.

Tools that dispense a precise amount of adhesive or sealant as required.

Uncoated steel is cost-effective Socket Cap Screws built for High-Tensile strength applications usually used in indoor tool and die fixture applications.

LOX features eight contact points--twice as many as the four points of Phillips and Robertson designs.

Driver bits built to drive a six-sided bolt head and is the most common bolt head style.

the Phillips Drive features two partial slots crossed at right angles.

The square drive system invented by P.L. Robertson more than a century ago.

Driver bits built to drive specialty style head types on fasteners and bolts.

Driver Bits & Bit Accessories - Screws

Drywall Screws are usually built with a bugle head and are intended to attach drywall to wood or metal studs.

Power Tools built for boring holes, set on a fixed stand.

Power Tools built to be used with sockets and deliver high torque output in sudden bursts of energy.

Power Tools built to drill holes and drive screws and are typically not as heavy as a regular drill.

Power Tools built usually to clean both wet and dry dust and debris and have a large collection bin or tank to hold the sucked up debris.

Power Tools built to lubricate the cutting blade with water to reduce chipping of tile and other materials while cutting.

Power Tools built like routers but specifically used to trim work pieces.

Products that aid in the dispensing or cleaning of expanding foam adhesive and accessories.

Fasteners built with an eye hook and a long shank for extra heavy-duty anchoring capability.

Fasteners built with an eye hook on one end and built to metric measurements.

Fasteners built with an eye hook on one end that has a shoulder built under the eye. Used to attach slings and other hardware.

Fasteners built to be driven into materials such as concrete, steel and masonry with a controlled explosion created by small chemical propellant charge also know as Direct Fastening...

LED Torches & Flashlights produce produces light when a suitable voltage is applied to the leads

Wearable Gear built to hold fasteners.

Drill bits built specifically to cut through glass or tile while reducing the chances of chips or cracks.

A substance that is used for bonding materials together that comes in a variety of dispensing options.

Handheld Tools built to hold, mount, and support abrasive screens and sheets.

Hand tools built for turning fasteners with hex shaped socket heads and are in the shape of an L.

Fasteners built for multiple attaching and hanging purposes.

Personal protection built to protect the wearers knees from abuse.

Handheld Cutting Tools built with a retractable blade for general purpose use.

Levels built to project a beam of light to produce a 180° or 360° chalk line either vertically, horizontally or both.

Lubricants built to stay on the surface in order to provide a smooth coating and help reduce friction.

Anchors built from metal for the installation of many different types of fasteners.

Fasteners built to be used with metal framing in its construction and use.

Look like common nails but are thinner. They are less likely to split wood but have decreased holding power than common nails.

Nails made for general construction and to hold a variety of materials together with wood fastening being the most common use.

Nails usually over 6" long are called spikes and are made for general construction and to secure large dimensional lumber.

Nails that are tempered to harden them so they don't bend when being driven into hard masonry materials.

Nails used for securing gypsum wallboard or drywall. The shank is ringed giving these nails extremely high holding power.

Temporary and easily removable double headed nail

Nails that have a brad head that is intended to be used on trim work and other wood applications where the head needs to sunk under the surface to conceal the nail

Nails with large heads and thick, heavy shafts that are made to hold roofing materials in place.

Nails for securing shingles to various surfaces.

Nails that have been twisted creating a spiral pattern down the shaft that gives the nail excellent holding power and is over 7" long.

Nails that have been twisted creating a spiral pattern down the shaft that gives the nail excellent holding power.

Spouts that attach to the end of adhesive products or guns to either mix the product or dispense it in a controlled manner.

Nuts that are internally threaded hexagonal blocks built to be assembled in conjunction with a bolt or a screw and are used to fasten materials together.

View All Locking Hex Nuts. This includes flange, kep, nylock, and more!

Nuts that are self-locking and come with an attached spring. These nuts fit into a channel and prevent screws from loosening due to vibrations.

Nuts in the shape of a square. Typically used when repeated loosening and tightening cycles are needed and are less likely to be rounded from this action.

Nuts in the shape of a threaded steel insert. Typically used in softer materials and fits flush with the surface of the material.

Nuts that are easily turned by hand due to the wing extensions on either side of the nut. Usually used where minimal pressure is needed.

Collated Fasteners held together with adhesive paper tape. Paper Collated Strip (or Stick) Nails are built with a clipped head and are ideal for construction environments.

Collated Fasteners held together with a plastic strip. Plastic Strip (or Stick) Nails are built with a full head and are ideal for construction environments.

Pneumatic Tools built to drive finishing (or brad) nails into various materials. Used in finishing projects or trim / molding fastening.

Pneumatic tools built to shoot small headless nails/pins into softwoods and MDF. Pinners can also be referred to as headless nailers.

Power Loads are specially-designed blank firearm cartridges built to create a controlled explosion when struck within a direct fastening tool.

Products made to pump water and other fluids from one place to the next.

Safety equipment built with a reflective material in order to help make the object visible in all lighting conditions.

Fully Threaded Rods are fasteners built to and stabilize and join together structural components.

A support frame built to support wood while sawing.

Screw & Bolt Extractors are tools built to remove secured bolts and screws that have broken heads and cannot be removed with conventional tools.

Hand Powered Screwdriver sets. This includes all brands and variations.

Hand Powered Screwdrivers built with multipe drives for convience and ease of use.

Ratcheting Screwdrivers are built to allow continuous tightening or loosening of a fastener.

Power Tools built to set or remove screws. This includes both Corded & Cordless Screwguns.

Hot Dipped Galvanized Lag Screws (or Lag Bolts) with very good corrosion resistance.

A Lag Screw (or Lag Bolt) with moderate corrosion resistance built for general use.

Screws - Flat Head Machine Screws

Screws - Round Head Machine Screws

Screws - Truss Head Machine Screws

Metal Screws built with a hex head and including a removable Ethylene Propylene Diene Monomer (EPDM) Gasket Washer.

Metal Screws with a flat top and built with a countersunk bearing surface.

Metal screws built with a hex head with a built-in washer.

Metal screws built with an oval style head.

Metal Screws with a Semi elliptical top surface built with a flat bearing surface.

Metal Screws with Low-profile semi-elliptical tops and a flat bearing surface.

Metal Screws with a countersunk flat top head and built with a cone-shaped bearing surface.

Uncoated steel is cost-effective Socket Cap Screws built for High-Tensile strength applications usually used in indoor tool and die fixture applications.

Corrosion Resistant Hex Socket Cap Screws built for High-Tensile strength applications usually used in tool and die fixture applications.

Screws built with a hex washer head and a self-drilling point.

Screws built with a pan head and a self-drilling point.

Flat Top Wood Screws with a countersunk bearing surface.

Wood Screws with hex drive heads.

Wood Screws with Semi elliptical top surfaces and a flat bearing surface. General purpose construction.

Wood screws with a round head that protrudes from the surface of the workpiece without any sharp corners.

Wood Screws with a round head that has a larger bearing surface underneath the head. 

Trim Head Wood Screws are a finishing screw built with a flat countersunk head. Trim Head screws have smaller heads that allow the screw to be easily hidden thus creating a more...

Wood screws with a wide, flat head that provides a large bearing surface to securely hold large wood projects together. Also called cabinet screws.

Socket Head Cap Screws are built for High-Tensile strength applications usually used in tool and die fixture applications.

Handheld impact tools that have a variety of different uses for specialized applications.

Collated fasteners built from thin wire or l-shaped piece of metal that get driven into materials to hold them in place.

Ladders built with glass-reinforced plastic. Almost as light as aluminum, and far more durable. Fiberglass ladders are safest choice when working around electrical current and...

Drill bits built for use with rotary hammers or hammer drills and is primarily for drilling holes at specific depths for drop-in anchors.

Hand Tools - Hard Case Tool Storage

Small to Medium Storage Units built with ridgid plastic or metal.

Large Storage Units usually built with heavy gauge steel.

Small to Medium Storage Units built with flexible fabrics.

View our selection of structural nuts, bolts, and washers. These products meet strict structural specifications.

Fasteners built for attaching structural attachments and components.

Strut Channel is a standardized light-duty structural support system used in the construction and electrical industries.

Fasteners built to help connect studs and other wall elements together.

Cutting tool sets that contain a selection of taps, dies or a combination of the two.

Various types of film that have adhesive on both sides for a wide variety of applications.

Duct Tape is built with scrim and is often coated with rubber or plastic.

Electrical Tape (or Vinyl Tape) is usually used to insulate electrical wires.

Filament Tape (strapping tape or pressure-sensitive tape) is built with fiberglass filaments embedded to add high tensile strength.

Flagging tape is an non-adhesive tape usually used to create highly visible and very bright markings in a wide variety of applications.

Foam tape is built with a foam/sponge carrier and can be used in Gasketing, Weatherstripping, Mounting, Glazing, for bumpers and whole lot more.

Tape built with a foil backing that is used for shielding and covering thermal insulation and duct work.

Masking Tape (or sticky tape) is a type of pressure-sensitive tape made of a thin and easy-to-tear paper.

Packaging Tape (Box Sealing or Pressure-sensitive tape) is built to seal corrugated boxes. Adhesive is usually coated on a polypropylene or polyester film.

Painter's tape is a thin paper tape built for masking areas.

Sheathing (or Tuck) Tape is built to seal seams and edges of sheet based moisture barriers.

Tapes built to do a variety of specialized tasks.

Transfer tape (application tap or pre-mask) is built to transfer your cut vinyl graphics from the release liner to the substrate.

Handheld or stationary tools built to facilitate easy application of pressure sensitive tape.

Products that are built to seal the threads of fasteners and fittings or produce gaskets between components.

Concrete anchors built to be used with direct fastener power tools.

Unsorted Product

Washers built to distribute the load and reduce friction and heat when being tightened between a nut, bolt, or screw.

Washers built with a large outer diameter for an extra wide bearing surface. They evenly distribute the load when used with bolts, screws, or nuts.

Washers that use a positive locking action when compressed in order to secure bolts or nuts to prevent them from loosening when exposed to vibrations.

Washers that have a high thickness and a smaller outer diameter that allow for use in tight spaces. Generally for use with socket head cap screws.

Washers made with small sharp teeth either on the inside, outside or both, that bite into the fastener and material to stop it from coming loose due to movement or vibration.

Outdoor equipment built to transport water from one location to the next.

Twist-on wire connectors ( Marrettes™ ) are electrical connectors built to fasten two or more low-voltage electrical wires together.

Collated Fasteners held together with welded wire. Wire Strip (or Stick) Nails are built with a clipped head and are ideal for damp environments.

Powerful mobile lights built to illuminate jobsites and work areas.

Job site equipment built to help get projects done by providing a work surface to work on.